Cleaning; Emptying The Dust Container - Gorenje GT-E808-08-01 Mode D'emploi

7. Pull the mains plug out of the plug socket, hold the mains cable securely and press
the button for winding up the cable (11). Holding the mains cable prevents any
"whiplash" effect of the mains cable.
8. To ensure optimum performance of the device, empty the dust container (7) after
each use and clean all fi lters regularly (see the "Cleaning" chapter).

Cleaning

CAUTION!
■ Empty the dust container at the latest when it is fi lled up to the MAX mark!
■ Always remove the mains plug from the plug socket before cleaning the device.
■ Keep the device, the mains cable and the mains plug away from water or other liq-
uids in order to avoid electric shocks. No liquid must be allowed to get into the device
when cleaning the device. Only the dust container, the exhaust air fi lter compartment
and the fi lters may be cleaned with water. They must be completely dry before they
are put back into the device.
■ The fi lters are neither machine-washable, dishwasher-safe nor suitable for tumble
drying! Only ever dry the fi lters in the air, and never use a hair dryer to do so.
■ Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These could damage the surfaces.
The fi lters may lose some of their colour over time. This is normal and does not
have any adverse effect on function.
• Clean the fi lters regularly, or if you notice a reduction in the suction power.
• Clean the housing with a damp, soft cloth if necessary. Then dry it with a soft cloth.
• Regularly remove hair and fl uff from the suction nozzles.

Emptying the Dust Container

23
1. Press the release button (10) of the dust container (7) and
pull it out of the device by the carrying handle.
2. Hold the dust container (7) over an open dustbin. The
distance between the dust container and the dustbin
should be as short as possible to ensure that the dust from
the dust container (7) falls into the dustbin only and does
not spill into the environment.
EN