Inserting / Removing The Telescopic Tube; Adjusting The Length Of The Telescopic Tube - Gorenje GT-E808-08-01 Mode D'emploi

Inserting / Removing the Telescopic Tube

Adjusting the Length of the Telescopic Tube

Attaching / Removing Suction Nozzles
• Attaching: Plug the free end of the telescopic tube (3) as far as it will go into one of
the suction nozzles supplied. Twist the suction nozzle back and forth slightly as you
do this.
• For greater fl exibility, the suction nozzles can also be plugged directly onto the suc-
tion hose (9), without the telescopic tube (3).
• Removing: Simply pull off the suction nozzle you have used.
Note on the big turbo nozzle:
When the big turbo nozzle is removed, the adapter sleeve may remain
stuck on the telescopic tube (3). Please note that the other suction noz-
zles can only be fi tted on the telescopic tube (3) if the adapter sleeve
has been removed from the telescopic tube (3)!
Inserting / Removing the Dust Container
21
• Inserting: Plug the open end of the handle into the match-
ing opening of the telescopic tube (3). Twist the handle
back and forth slightly as you do this. Then check the con-
nection to make sure there is a secure fi t.
• Removing: Simply pull the telescopic tube (3) away from
the handle.
• Push the slider on the telescopic tube (3) downwards and
pull the telescopic tube (3) out to the length you want.
• Release the slider and move the telescopic tube (3) a little
bit more until it engages.
• Removing: Press the release button (10) of the dust con-
tainer (7) and pull it out of the device by the carrying handle.
• Inserting: Grip the dust container (7) by the carrying handle
and fi rst insert the bottom of the container into the device.
Then press the carrying handle against the device housing
until the dust container (7) audibly engages in the locking
catch. Lift up the device by the carrying handle to check
whether the dust container (7) is in the correct position.
EN