Parts List - Bradley S19-270C Manuel D'installation

S19-270C, S19-270E
RE-ORIENT DIRECTIONAL
INSERT AS SHOWN
Figure 2
Parts List — S19-270C
Item Part No.
1 S05-092
2 107-371
3 113-1032
4 118-288
5 125-135
6 125-120
7 S39-604
8 192-016
9 160-413
10 125-001CS
Parts List — S19-270E
Item Part No.
1 S05-162
2 S53-063
3 113-1032
4 118-288
5 125-135
6 125-120
7 S39-604
4
RE-ORIENT BENT PIPE AND HEAD ASSEMBLY AS SHOWN.
RESEAL THREADED ENDS OF BENT PIPE AS REQUIRED
LEFT-HAND MOUNTING
Qty Description
1 Eyewash Assembly
2 Tethered Dust Cover
1 Pipe, Bent (Plated)
1 Valve Body (Plated)
1 O-Ring
1 O-Ring
1 Actuator Sub-Assembly - Valve
1 Insert, Direction (Plated)
1 Screw, Set
1 O-Ring
Qty Description
1 Eye/Face Wash Assembly
2 Tethered Dust Cover
1 Pipe, Bent (Plated)
1 Valve Body (Plated)
1 O-Ring
1 O-Ring
1 Actuator Sub-Assembly - Valve
12/10/07
S19-270C SHOWN.
S19-270E IS REASSEMBLED IN THE SAME MANNER.
Item Part No. Qty
11 132-047 1
12 125-032 1
13 150-203 1
14 142-002CB 1
15 110-115 1
16 S45-381 1
16.1 169-946 1
16.2 169-945 1
17 114-051 1
18 204-421 1
Item Part No. Qty
8 192-016 1
9 160-413 1
10 150-203 1
11 142-002CB 1
12 110-115 1
13 114-051 1
14 204-421 1
Bradley Corporation • 215-1326 Rev. L; ECN 07-523A
Description
Insert, Flow Control
Flow Control
Flange (Plated)
Stainless Steel Washer 7/8" I.D.
Hex Nut
Slip Joint Prepack
Slip Joint Cone Washer
Slip Joint Nut
Safety Sign
Inspection Tag
Description
Insert, Direction (Plated)
Screw, Set
Flange (Plated)
Stainless Steel Washer 7/8" I.D.
Hex Nut
Safety Sign
Inspection Tag
Installation