brennenstuhl RCS 1044 N Comfort Mode D'emploi page 15

079515 BA_Funkschaltset RCS 1044 N.qxp 12.06.17 15:47 Seite 15
RCS 1044 N Comfort
2. Using DIP switches (10) 1 through 5, set a system code.
3. Close the battery compartment (9).
Setting the system code on the switch outlet
11 12 13
15
3
1. Unscrew the screw (15) on the cover (12) using the right
sized Phillips head screwdriver.
2. Sightly lift the cover (12) over the screw opening (11) and
swivel it outward.
3. Using DIP switches (13) 1 through 5, set the same system
code used for the remote control.
Assigning the switch outlet to an operating button
1. Using DIP switches (13) A through E, set an operating
button on the remote control.
DIP switch E is not assigned.
14
15