brennenstuhl RCS 1044 N Comfort Mode D'emploi page 17

079515 BA_Funkschaltset RCS 1044 N.qxp 12.06.17 15:47 Seite 17
RCS 1044 N Comfort
In order to connect the switch outlets
• plug the switch outlet into an outlet.
In order to connect the remote control
• insert the battery into the battery compartment (9).
OPERATION
Switching on the switch outlet
1. Plug the switch outlet (1) into an outlet.
2. Plug the device into the switch outlet (2).
3. Press the preset button (8) ON (for instance A) in order to
switch the switch outlet (1) on.
The function lamp (5) will illuminate every time the button is
pressed.
Switching off the switch outlet
1. Press the preset button (6) OFF (for instance A) in order to
switch the switch outlet (1) off.
The function lamp (5) will illuminate every time the button is
pressed.
CLEANING
Attention! Risk of electrical shock
Prior to cleaning the device, disconnect it from the
power grid.
Attention! Risk of electrical shock
Make sure no liquids get into the device.
Moisture in the outlet can lead to short circuits.
Attention! Risk due to aggressive solvents.
Never use aggressive solvents or scouring agents to
clean the outlet.
Clean the device with a soft, slightly moistened cloth and mild
detergent.
Prior to the next use, ensure the device is completely dry.
17