microphone grill. If you cover the rear sound
entries, the microphone will lose its directivity
and its gain before feedback would drop
sharply.
1. Keep the maximum number of vocalists shar-
ing a microphone to two.
2. To get adequate signal level, make sure the
two vocalists will remain within an angle of
±35 degrees off the microphone axis.
To clean the microphone case, use a soft cloth
moistened with water.
1. Unscrew the front grill from the microphone
CCW.
2. Remove the windscreen from the from grill
and wash the windscreen in soap suds.
3. Allow the windscreen to dry overnight.
4. Replace the windscreen in the front grill and
screw the front grill on the microphone CW.
2 Using Your Microphone
2.5.4 Backing
Vocals
Refer to fig. 18.
3 Cleaning
3.1 Microphone
Case
3.2 Internal
Windscreen
(D 77 S, D 88 S)
15