Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLE SHOOTING
CODE
CAUSE
204
MEASURING
RESULTS NOT
PLAUSIBLE
208
EXCESS CURRENT
220
LOW BATTERY
252
HIGH TEMPERA-
TURE
253
LOW TEMPERA-
TURE
255
weAK sIgNAl
MEASURING TIME
TOO LONG
256
RECEPTION
SIGNAL TOO
STRONG
261
OUT OF RANGE
500
HARDWARE
ERROR
MAINTENANCE
WARNING:
Do not turn the laser on while
cleaning the lens. Serious injury to eyes could result.
• Keep the laser lens clean. A dirty lens will affect the
laser beam operation. Clean the lens with a moist
cotton swab. Clothes with nylon content could scratch
the lens causing the laser to operate incorrectly.
• clean the tool housing with a moist cotton cloth.
Use only water. Do Not use cleaners, solvents or
compressed air to clean the tool.
• Never immerse or let liquid get inside the tool.
• Dry the tool with a cotton lint fee cloth and allow to dry
completely before using or storing the tool.
CORRECTIVE MEASUREMENT
ReTAKe MeAsUReMeNTs AccoRD-
ING TO SPECIFICATIONS
RETURN TOOL TO MANUFACTURER
INSTALL 2 NEW BATTERIES
LET TOOL COOL TO BELOW 104°
WARM TOOL TO ABOVE 32°
USE A TARGET PLATE ON A MORE
REFLECTIVE SURFACE
REDUCE TARGET REFLECTIVENESS
OR DECREASE AMBIENT LIGHT
MEASURE TARGET WITHIN RANGE
REMOVE AND REINSTALL BATTERIES
English
This product is warranted free from defects in material and
workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT
COVERED BY THE 2 YEAR WARRANTY.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free:
Or visit our website:
www.
powersmithproducts.com
6
wARRANTy
HELP LINE
888-552-8665.
Publicité
Table des Matières
