Cooking Table; Power Management Function - Faber FBH 64 BK FFI Manuel D'utilisation

Masquer les pouces Voir aussi pour FBH 64 BK FFI:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Combo mode ("bridge"
function)
AUTO function

9. COOKING TABLE

Cooking method
Power level
Melting, heating gently
1
Melting, heating gently
2
Warming up
3
Prolonged cooking, thickening, stewing
4
Prolonged cooking, thickening, stewing
5
Prolonged cooking, braising
6
Light frying
7
Frying, deep fat frying
8
Quick frying at high temperature
9
Quick heating
P
10. POWER MANAGEMENT
FUNCTION
2
1
"This product is equipped with electron-
ically controlled power management.
This function allows 2 cooking areas to be combined to use and control them as if they were one
and have a bigger cooking area at your disposal. This function allows you to use pans with a wider
base.
Only the cooking areas on the left can be selected for use with this function.
To enable: simultaneously press both keyboards on the left until a digit indicates
lights up.
To set the power of the area that can be used in combo mode, use the last swipe keyboard on the
left.
In both cooking areas, the symbol lights up.
To disable: simultaneously press the keys used to enable the "bridge" function until the symbols
disappear.
Important! The hob automatically recognises the presence of a larger pan that occupies two cook-
ing areas, but it will manage the areas separately unless the "bridge" function is enabled.
This function allows you to enable AUTO mode so that operation of the hob and hood are coordin-
ated. When the hob is switched on, the lights are also switched on. The hood speed is automatic-
ally set using the highest power level present on the hob.
Hob-Hood Coupling
With the hob off, simultaneously press "+" and "-" and the coupling procedure will be activated and
an animation will appear on the display.
CAUTION: once the procedure has been activated, refer to the hood manual and check that the K-
Link Coupling procedure has been activated. The coupling procedure takes 2 minutes.
Press "+" and "-" again to confirm.
Hob-Hood Decoupling
With the hob off, press "-" for 2 seconds. An animation will confirm the operation.
3
To be used for
Butter, chocolate, gelatine, sauces
Butter, chocolate, gelatine, sauces
Rice
Vegetables, potatoes, sauces, fruit, fish
Vegetables, potatoes, sauces, fruit, fish
Pasta, soups, braised meat
Rösti (potato fry-ups), omelettes, breaded and fried
foods, sausages
Meat, chips
Steak
Boiling water
See the illustration.
This function monitors the electricity in-
put and limits the maximum power output
to 3700 W for cooking areas 1 and 2, op-
timising the power distribution and pre-
venting the system from overloading.
Hob in full power setting - the function di-
vides the power between cooking areas
4
and automatically decreases the power
of the other cooking area, if necessary
(the last command has highest priority).
Hob in power limitation setting - the func-
tion divides the power between cooking
areas and does not allow you to set the
power for the other cooking area above
and the symbol
11

Publicité

Table des Matières
loading

Table des Matières