Unpacking; Disposal Of The Packaging - SilverCrest SWC 300 A1 Mode D'emploi

WARNING! RISK OF INJURY!
Allow the appliance to cool down before attach-
►
ing or detaching attachments.
Use only the supplied original accessories as
►
these have been optimised for interaction with
the appliance. Other parts are possibly not ad-
equately safe.
Keep the openings for air inlet and outlet clear
►
so as to have unimpaired air fl ow. Otherwise the
appliance may overheat.
Exercise caution when using hair spray, water
►
atomizers etc. It could happen that the air fl ow
may blow these substances directly into your
eyes. On the other hand, these substances must
not enter the appliance – they may be infl amma-
ble, agressive or conductive for electricity.

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the
carton.
♦ Remove all packing material.
WARNING! RISK OF SUFFOCATION!
► Packaging materials should not be used as a play thing. There is a risk of
suff ocation.

Disposal of the packaging

The packaging protects the appliance against transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
SWC 300 A1
GB
31