Cartridge Installation; Keyboard - Geonav 6 PLUS Manuel D'emploi Et D'installation

Cartridge Installation

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Removing the cartridge
• Make sure that the unit is perfectly dry.
• Remove the rubber cover on the unit right side and extract the car-
tridge.
ATTENTION: The rubber cover should be removed only when inserting or replacing the cartridge.
20
CARTRIDGE INSTALLATION
Installing the cartridge
• Remove the rubber cover on the
unit right side protecting the
Navchart™ cartridge slot.
• Insert the cartridge into the slot
paying attention to the reference
groove.
• Replace the rubber cover exer-
cising light pressure and make
sure it is perfectly inserted to
avoid any water infiltration.

Keyboard

KEYBOARD
ZOOM+/ZOOM- • Cursor mode:
Selects the chart range. Deletes the last
waypoint or the
ENTER marker pointed by
Enters a marker or the cursor.
confirms a selection
from the menu. CURSOR
• Moves the manual
PAGE cursor across the
• Navigation mode: screen.
Turns navigation • Allows switching
data pages. from N a v i g a t i o n
• Cursor mode: mode to Cursor
Allows switching mode.
from Cursor mode • Allows selecting
to Navigation mode. from the options in
the
GOTO submenu.
Allows plotting a route • At start-up, allows
toward a manual cur- adjusting screen
sor position, desired contrast.
marker, port, nearest
port service or specified ON/OFF
position (lat/lon). • Switches
GEONAV on / off.
CLR • Allows adjusting the
• Navigation mode: screen backlight.
Deletes the current
route.
menu /
the
21