Sylvania LD427SSX Guide D'utilisation page 13

No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
[Audio Output Connection]
 Digital (for digital broadcasting only)
If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.
During BD or DVD playback, you can enjoy Dolby Digital and DTS surround sound.
 Analog (for both analog and digital broadcasting)
If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio.
Use an RCA audio cable to connect the unit to external analog audio devices.
e.g.)
Dolby Digital
decoder
stereo system
[PC Connection]
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
e.g.)
personal computer
HDMI-DVI conversion cable
should be with ferrite core.
The following signals can be displayed:
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1,024 x 768
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
DIGITAL AUDIO
COAXIAL IN
or
AUDIO IN
L R
stereo mini plug-RCA
conversion cable
DVI OUT
HDMI-DVI HDMI-DVI
conversion cable conversion cable
Refresh rate
60Hz
60Hz
60Hz
Español
digital audio coaxial cable
rear of this unit
RCA audio cable
Format Resolution
1,280 x 768
WXGA
1,360 x 768
FHD 1,920 x 1,080
Français English
rear of this unit
To HDMI1 To HDMI1
input jack only input jack only
Refresh rate
60Hz
60Hz
60Hz
13
EN