EUROM Gardencleaner 3001 Manuel D'utilisation page 32

Remove all packaging material and keep the packaging material out of the reach of
children.
Do not use the device until it has been fully assembled as shown in the
picture! Remove the plug from the socket during installation and removing
• Put the 2 suction / blower duct parts firmly together until you hear a click. Check
that all connections are tight and secure with the long screw.
• Insert suction / blower channel as far as possible into the leaf reamer body.
Check that all connections fit correctly and secure them with the safety screw
ST4x14 on the top and the ST4x16 screw on the bottom.
• Place the wheel bracket with 2 wheels on the suction / blowing channel and
secure with the last screw ST4x16.
Collection bag attachment
• Before attaching the collection bag, check that
the vacuum / blow selector operates smoothly
and is not bothered by waste from previous use.
• Slide the catch bag buckle around the suction /
blower hook.
/ reattaching the collection bag!
32