BREIL manta CHRONO PROFESSIONAL Mode D'emploi page 14

Setting the stopwatch hands
If the stopwatch hands to return to "0" position when the stopwatch is reset or the
battery is replaced, perform the procedure below to reset them to "0".
Stopwatch minute hand
Stopwatch hour hand
Stopwatch second hand
1. Unscrew the crown and pull it all the way out (second click).
2. Press button
3. Press button
* The hands move quickly if the button
4. Once the hands have been reset, set the time again, then push the crown back in
to normal position and screw it in.
5. Press button
10
to reset the stopwatch second hand to "0".
to reset the stopwatch 1/20 hand to "0".
to check that the stopwatch hands go back to "0".
Button
80
Button
Stopwatch 1/20 second hand
or are kept pressed.
Crown (second click)
Setting stopwatch
hands to "0" position