Selecting Repeat Play; Selecting Random Play; Selecting A Folder/Track/File - Kenwood KDC-X596 Mode D'emploi

Selecting Repeat Play

Press number button 4 (REP) repeatedly
to make a selection.
Audio CD : TRACK REPEAT, REPEAT OFF
AAC/MP3/WMA : FILE REPEAT, FOLDER
REPEAT, REPEAT OFF
iPod : FILE REPEAT, REPEAT OFF

Selecting Random Play

Press number button 3 (RDM)
repeatedly to make a selection.
Audio CD : DISC RANDOM, RANDOM OFF
AAC/MP3/WMA/iPod : FOLDER RANDOM,
RANDOM OFF
For AAC/MP3/WMA/iPod : Press and
hold number button 3 (RDM) to select
"ALL RANDOM. "
– Applicable only if "RANDOM OFF" is
selected initially.
– Changes the iPod browsing item to
"songs. "
About Audio file
Playable Audio file: AAC-LC (.m4a), MP3 (.mp3),
WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet,
Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
Although the audio files are complied with the standards
listed above, the playback maybe impossible depending on
the types or conditions of media or device.
About USB device
This unit can play AAC/MP3/WMA files stored on a USB
mass storage class device.
Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
You cannot connect a USB device via a USB hub and
Multi Card Reader.
Make sure all important data has been backed up to
avoid losing the data.
Connecting a cable whose total length is longer than 5 m
can result in abnormal playback.

Selecting a folder/track/file

1 Press to enter Music Search mode.
"SEARCH" appears, then the current file
name appears on the display.
2 Turn the volume knob to select a folder/
track/file, then press to confirm.
To return to the root folder (or first track for
audio CD), press number button 5 (iPod).
To return to the previous folder, press
To cancel the Music Search mode, press
and hold .
< or > on the display indicates that
preceded/next item is available.
For USB device * and iPod: To skip search,
press 4 / ¢.
* This operation is effective only for the files
registered in the database created with
Kenwood Music Editor. (See below.)
About "KENWOOD Music Editor"
This unit supports the PC application "KENWOOD Music
Editor Light ver1.1" or later.
When you use the audio file with database information
added by the "KENWOOD Music Editor Light ver1.1,"
you can search a file by title, album or artist name using
Music Search.
In the Instruction manual, the term "USB device" is
used to mean the device that contains audio files with
database information added with KENWOOD Music
Editor.
"KENWOOD Music Editor Light ver1.1" is available from
the following web site: www.kenwood.com/cs/ce/
For further information on "KENWOOD Music Editor Light
ver1.1," refer to the site above or the application help.
.
11