Parts And Controls; Initial Use; Entering User Data; Activity Levels - Beurer BF 130 Mode D'emploi

3. Parts and Controls

1 LCD display
2. Left button ( )
3. SET button
4. Right button ( )
5. Conductors

4. Initial Use

Inserting the batteries
Remove the plastic battery isolator strip by pulling it from the Battery Compartment Cover. If the scale does
not func tion, remove the batteries completely and reinsert them, ensuring proper polarity.
Changing the weight unit
The scale is set to weigh in pounds (lb) from the factory. Switch the scale on by briefly applying pressure
to the top surface with your foot for 1-2 seconds. Wait until "lb" appears in the display. Press the Weight
Selector Button on the rear of the scale until the desired weight unit appears in the LCD Display ("kg" for
kilograms or "st" for stones).
Positioning the scale
Place the scale on a hard, flat surface with no carpet or rugs; a hard surface is crucial to accurate measure-
ments.

5. Entering User Data

To calculate your body fat percentage and other values, you must save your personal user data. The scale
can store ten separate users, which allows you and members of your family to save and access each of
your personal settings.
1. With the scale on a hard, flat surface, switch the scale on by briefly applying pressure to the surface with
your foot (approx. 1-2 sec onds). Wait until "0.0" and the selected measurement unit appears in the LCD
Display.
2. Press the SET Button. The first memory space flashes in the LCD Display.
3. You can now make the following settings:
User data
Users/persons
Height
Age
Gender
Activity level

Activity levels

Select an activity level that best reflects your lifestyle.
Activity Level Physical Activity
1 None
Low: Small amount of light physical exertion (e.g. going for walks, easy gardening,
2
simple gymnastics)
Set values
1 to 10
3 ft 3 in to 7 ft 3 in
(100 to 220 cm)
10 to 100 years
Male ( ), female ( )
1 to 5
1
2 3
4
5
5