Num'axes VIS1056 Guide D'utilisation page 14

is displayed when the batteries are running low. You may purchase NUM'AXES batteries from
your distributor or directly from NUM'AXES at any time.
4. Inserting the microSD card
The VIS1056 night vision binoculars require a microSD memory card (up to 64 Gb - class 10).
Always turn the unit off before inserting or removing the microSD card. Failure to do so may
cause loss or damage to files already saved on the memory card.
Insert the microSD card into the slot and push it in until it clicks into place. To remove the
microSD card, gently press the card to release the lock and pull it out.
NB: If your microSD card is not new, make sure to format it prior to insertion.
5. Switching the night vision binoculars on
Press the On / Off button for about 2 seconds to start the VIS1056 night vision binoculars.
6. Taking photos or videos (without audio)
To take a photo, press the [MODE] button and select the photo capture mode. This icon
will appear in the upper left corner of the screen. Press the [SNAP] button to take a photo.
To shoot a video, press the [MODE] button and select the video mode. This icon
appear in the upper left corner of the screen. Press the [SNAP] button to start video recording
and press the [SNAP] button again to stop recording.
7. Viewing or deleting photos or videos
To view saved videos and photos, press the [MODE] button and select the play mode. Then
press the [SNAP] button. You will be able to view photos / play videos.
To delete saved videos and photos, in play mode, press the [SNAP] button again. You will be
able to delete a photo / video.
8. Switching the device off
Press the On / Off button for about 2 seconds to turn the VIS1056 night vision binoculars off.
9. Adjusting the lens focus
Aim at the object you want to view and adjust the focus wheel located just below the lens
until the image on the screen is sharp and clear.
VIS1056 - Indice A – Mai 2021
will
14/35