Bestron ABM2003 Mode D'emploi page 53

user's instructions
On cutting the loaf the
centre is found to be
hollow.
Powder remaining in
the baking tin.
cleAninG And MAintenAnce
• Always remove the plug from the wall socket before cleaning the appliance.
• Wait until the breadmaker has cooled down completely.
• IMPORTANT! The lid and/or housing must never be sprayed with or immersed in water or other
liquids.
• Clean the exterior of the breadmaker solely with a damp cloth.
• Any stains on the interior of the lid or in the air slits will be on the surface only; these stains develop
during the baking process. They have no influence on the performance of the appliance. After each
use of the appliance remove these stains using a damp cloth with a little washing-up liquid.
• Clean the interior of the breadmaker solely with a damp cloth.
• Use only warm water to clean the baking tin. Avoid scratching the non-stick layer.
• Verify that the breadmaker has cooled down completely before storing it in a cupboard.
Never use the following cleaning agents utensils:
• Paint thinners;
• White spirit or petrol;
• Scourers;
• Polish;
• Chemical cleaning cloths.
cleAninG And MAintenAnce - care of the non-stick coating
Avoid damage to or scratches in the non-stick coating. Never use sharp objects such as metal spatulas,
knives or forks. The colour of the coating can change over the course of time. This is caused by the
repeated moistening and heating of the coating. However, it has no influence on the quality of the bread
baked by the breadmaker. The opening in the centre of the kneading blades must be cleaned at regular
intervals; after cleaning, lubricate with a drop of edible oil. This will prevent the kneading blades from
sticking to the drive shafts. Remove any dust from the ventilation openings.
cleAninG And MAintenAnce - storing of the breadmaker
Make use that all parts are dry. Check that there is no moisture inside the appliance. Close the lid; do not
put anything on the lid.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
Too much water and/or yeast
added, no salt added.
Too little water added.
41
Reduce the quantity of moisture and/or
yeast, and add more salt.
Use more water.