Changing The Mode - Speedlink SL-6698 Mode D'emploi

LED with the individual sensitivity levels:
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Note: the LEDs blink for 6 seconds after setting the steering angle. With levels 4-6, two
LEDs blink (e.g. green and yellow, etc.).
Adjusting the In-Game Sensitivity
Certain racing simulations use a large dead zone, in which no steering action takes
place up to a predetermined steering angle. You can adjust this by setting the wheel
sensitivity to high. The higher the sensitivity the smaller the dead zone is.
With games which are preset to a small or no dead zone even a low steering angle can
lead to maximum steering in game. In this case you should reduce the sensitivity of the
racing wheel.
What sensitivity setting is suitable for which game depends on the preferences of each
user.
6. Switching vibration effects on/off
There are 2 modes available: Power Feedback with Dualshock™ and effects switched
off. Power Feedback effects are switched on by default.

Changing the mode:

1. Simultaneously press SELECT+X+ for 3 seconds to change the mode.
Repeat this until you have set the required mode.
The LEDs on the steering wheel blink briefly each time.
Green LED Red LED
X
X
X
X
X X
1
Yellow LED
X
X
X
DE
GB
FR
ES
IT