Speedlink SL-6698 Mode D'emploi page 12

1. Installing
DE
Note: make sure the mounting surface is even.
GB
1.1 Table mounting
FR
1. Attach the table clamp to the bottom of the steering wheel
(see figure below)
ES
2. Place the steering wheel on the table and sufficiently tighten the
screw of the table clamp to stop the steering wheel slipping.
IT
1.2 Leg support
1. Unpack the thigh supports.
2. Turn the steering wheel upside down and
fasten the supports in the holes provided for
this.
3. Rest the steering wheel on your thighs
as shown in the diagram.
2. Connecting to a games console or PC
1. Disconnect your games console.
2. Connect the power plug of the supplied mains adapter to the left side of the
steering wheel.
3. Connect the mains adapter to a power outlet.
4. Connect the pedal block to the 6-pin cable of the steering wheel.
Note: For automatic detection of the steering lock, do NOT touch the steering wheel!
The steering wheel configures itself automatically.
2.1. Connecting to PlayStation
Note: Do not connect the steering wheel to the PlayStation2 via the USB plug! It will
only work when the PlayStation2 connector of the steering wheel is plugged into the
socket of the PlayStation2.
1. Connect the PlayStation2 connector of the steering wheel to port 1 of your
PlayStation2 console.
2. Switch on the TV and games console.
1