Honeywell HM0CESAWK6 Mode D'emploi page 18

USE AND OPERATION (CONTINUED)
REMOTE CONTROL
All key functions can be accessed from the remote control.
Timer / Temperature Set Control
•
In timer mode, press
to adjust the time setting for 1
hour intervals.
•
Timer setting is available from
1 - 24 under cooling mode,
press and to up or down
the temperature.
LED Display Control
Press to switch ON/OFF the
front panel LED display
Swing Control
ON / OFF
Fan Speed Control
• HIGH • MED • LOW
Note:
• Battery Installation: Remove the cover on the back of the remote control and insert two AAA
batteries with + and - pointing in the proper direction according to the polarity markings.
Caution:
• Use only two AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote control is not in use for a month or longer.
• All batteries should be replaced at the same time, do not mix with old batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Properly dispose of used batteries.
and
Press to switch temperature between
Centigrade and Fahrenheit.
Press
in the order of:
Cooling
Heating*
*Applicable for models with Heating feature only.
EN 10
°C / °F Control
Mode Control
to change the operation mode
Dehumidifying
Fan
Sleep Control
ON / OFF
Power Control
ON / OFF