Honeywell HM0CESAWK6 Mode D'emploi page 17

USE AND OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
SLEEP MODE
Sleep Mode is for energy-saving comfort during the night. When Sleep Mode is ON in Air
Conditioning Cooling Mode, the fan will automatically stay on LOW Speed and the set temperature
will increase by 2°F (1°C) on the first hour. It will increase another 2°F (1°C) on the second hour, and
remain at this temperature for the rest of the night, until Sleep Mode is deactivated.
When Sleep Mode is ON in Heating Mode*, the fan will automatically stay on LOW speed and
the set temperature will reduce by 2°F (1°C) on the first hour. It will reduce another 2°F (1°C) on the
second hour, and remain at this temperature for the rest of the night, until Sleep Mode is deactivated.
*Applicable for models with Heating feature only.
TIMER CONTROL
While the unit is turned on, press the timer button then press the or to select the number of
hours you would like the unit to continue to run. Then press timer button again to confirm, The unit
will turn off automatically.
AUTO TURN OFF:
While unit is running, press the or button to select the number of hours you want the unit to
run in air conditioning mode.
AUTO TURN ON:
When unit is in a standby mode, then press the or button to select the number of hours until
you want the unit to automatically start running.
SWING CONTROL
Press button on the remote control to activate automatic oscillation of louvers. the indicator
light will be illuminated on the control panel. Press button again to stop swing when louvers
reached a desired angle.
WATER FULL LIGHT
Condensation may accumulate in the unit.
If the internal tank becomes full, the Water Full Light will illuminated. After 5 minutes, an
"E2" / "E4" Error Code will be displayed on the screen to indicate that the tank is full. The unit will not
operate until the tank has been drained (refer to the "Water Condensation Drainage" section).
ADDITIONAL FEATURES:
AUTOMATIC DEFROST FEATURE
Sometimes when the unit is operating in cooling mode in lower room temperatures (e.g. lower than
60°F), the internal cooling coils may become too cold and sometimes frost may develop on the
cooling coils. When this happens, the unit will automatically pause operation and defrost the cooling
coils to protect the unit. The air conditioner will restart automatically when the system has defrosted
and returns to standard operational temperatures.
EN 9