Reliable ARIA 100SP Guide D'utilisation page 12

steam burst button continuously for several seconds to clear the pressing plate of
residual water or calcium buildup in system before use.
NOTE: Some garments have details such as darts, curved seams, and shoulder
pads which should not be pressed flat. Use the pressing cushion provided for use in
these areas.
WARNING: Do not attempt to lower the pressing plate to its lowest position or lock
the press with the pressing cushion in between. You may damage your press by
doing so.
BASIC IRONING
TABLE CLOTH
Fold the length of the fabric in either half or thirds and place on the ironing board.
Accordion pleat the length on the ironing board and move the pleated item into
the large open space behind the ironing board.
Move the tablecloth towards you, then press.
Continue moving forward until the entire item is pressed.
To store, fold it and place it on the ironing board and close the press. Apply
minimal pressure. If necessary, refold the tablecloth to press any areas that were
hanging off the sides of the ironing board. Repeat the pressing procedure.
Hint: Use the same method for most large items, such as duvet covers, bed sheets,
pillowcases, table runners, towels, blankets, quilts, etc.
PANTS
09