ARDES AR5EA23 Mode D'emploi page 13

INSTRUCTIONS FOR USE
Place the fan on a flat, dry and stable surface, and insert the plug of the
fan in a socket. Select the desired speed by pressing the buttons on the
control panel (4):
- mod. AR5EA23
0 = off, 1 = minimum speed, 2 = maximum speed.
- mod. AR5EA30, AR5EA30W, AR5EA40, AR5EA40W,
AR5AM30, AR5AM40:
0 = off, 1 = minimum speed, 2 = medium speed, 3 = maximum speed.
OSCILLATION:
For the automatic oscillation from right to left press the knob (6) placed
on top of the motor. To disable it, pull up the knob.
VERTICAL SLOPE:
You can vertically point the front of the fan
choosing the desired angle. It is sufficient to
move the front of the fan up or down according
to the desired slope.
Before carrying out the regular cleaning operations turn off the fan
and unplug it.
Ensure that the fan is switched off from the supply mains before
removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug
to the mains.
When you do not use it, after cleaning it, store the fan in a dry place.
MAINTENANCE
13