ARDES AR5EA23 Mode D'emploi page 12

1. Screws (4 pieces)
2. Base
3. Main body
4. Control panel
5. Motor shaft
6. Oscillation knob
7. Safety screw
1. Mount the base on the main body fixing it
with the 4 screws provided as shown in figure
(mod. AR5EA30, AR5EA30W, AR5EA40,
AR5EA40W, AR5AM30, AR5AM40).
2. Unscrew the locking ring of the rear grille
(11) from the motor shaft (5) by turning it
counterclockwise.
3. Insert the rear grille (12) on the motor shaft
(5) making sure that the handle on the back is
facing upwards and the locking pins (A-B) are
in the vertical holes of the rear grille. Screw
the locking ring (11) by turning it clockwise.
4. Insert the fan (10) on the motor shaft (5) and fasten the proper lock ring
(9) by rotating counterclockwise.
5. Open the clips of the front grille (8) and place it on the back grille (12)
making sure that the logo on the central stud is placed horizontally,
parallel with the floor.
6. Find the proper position to lock the clips and insert the safety screw
of the grille (7).
12
ASSEMBLING
8. Front grille
9. Lock ring of the fan
10. Fan
11. Lock ring of the back grille
12. Back grille
13. Motor
A-B. Locking pin for the rear grille