Pentair PENTEK PPC7 Série Manuel D'installation page 11

Specifications
PENTEK Pressure Control specifications
Input to Control
Rated Input AC Volts/Hz/Phase:
Max. Permissible AC Voltage Fluctuation
Circuit breaker Rating
Models PPC7-1-7A3-1-A, PPC7-1-7A3-3-A
Models PPC7-1-13A2-1-A, PPC7-1-13A2-3-A
Output Power to motor
Models PPC7-1-7A3-1-A, PPC7-1-7A3-3-A
Models PPC7-1-13A2-1-A, PPC7-1-13A2-3-A
Frequency
max. Length of Wire, Control to motor
Models PPC7-1-7A3-1-A, PPC7-1-7A3-3-A
Models PPC7-1-13A2-1-A, PPC7-1-13A2-3-A
For longer runs, limit voltage drop to less than 2%
Pressure setting
Control is Factory Preset to
Adjustable Range
Tank Precharge
ambient Conditions
Operating Temperature Range
Storage Temperature Range
Maximum Ambient Humidity
auxiliary Relay Rating:
Dimensions:
Model PPC7-1-7A3-1-A
Model PPC7-1-13A2-1-A
Model PPC7-1-7A3-3-A
Model PPC7-1-13A2-3-A
Enclosure:
Models PPC7-1-7A3-1-A, PPC7-1-13A2-1-A
Models PPC7-1-7A3-3-A, PPC7-1-13A2-3-A
Internal Overload Protection:
Up to 7.3 Amps; Default is 6.3 Amps
Up to 13.2 Amps; Default is 11.5 Amps
70% of Pressure Set point
(42 psi pre-charge for factory-set 60 psi set point)
14°F to 122°F (-10°C to +50°C)
-4°F to 149°F (-20°C to +65°C)
Less than 90% Non-Condensing
14-3/8"H x 12-3/16"W x 7"D
16-3/8"H x 12-3/16"W x 8-1/4"D
150% for 60 Seconds, 200% for 3 Seconds
11
230V/50-60Hz/1 Ph
170-264V/50-60Hz
15 Amp 2-Pole Breaker
30 Amp 2-Pole Breaker
Variable: .2 – 80 Hz
See Table 2, Page 4
See Table 2, Page 4
60 psi
0-100 psi
AC: 230 Volts, 0.3 Amps
DC: 30 Volts, 0.3 Amps
12"H x 12"W x 8"D
15"H x 12"W x 8"D
NEMA 1
NEMA 3R