Brandt BIC2272SW Guide D'installation Et D'utilisation page 45

EN 1/ INSTALLING YOUR APPLIANCE
INSTRUCTIONS FOR FITTING
(continued)
Open the door of the appliance and
of the furniture about 90°. Insert the
bracket (Hb) into the runner (Ha).
Hold appliance and furniture doors
together and mark the position of
the holes as shown in the drawing.
Remove the bracket and make holes
8 mm from the outer edge of the
door using a drill fitted with a 2 mm
drill bit.
Put the bracket back on the runner
and fix it with the 8 screws provided.
Use the set of oval holes to align the
door of the furniture if necessary.
At the end, it is necessary to check
that the door of the appliance can
shut perfectly.
Click the cover (Hd) onto the runner
(Hb).
If the appliance is fixed laterally to
the furniture column, unscrew the
screws of the brackets (D) and move
them as in the drawing.
Fix them again. Put on the cover (E).
07