Publicité
A. Cable length
A. Longueur du câble
A. Longitud del cable
1. Locknut
1. Contre-écrou
1. Contratuerca
A
1 2
a
b
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste
EBU11920
Parking brake adjustment
Parking brake adjustment may be required if the
parking brake does not hold properly. The cable
length "A" should be adjusted to 46–50 mm.
1. Fully loosen the locknut and the adjusting
bolt at the clutch lever.
2. Loosen the locknut and the adjusting bolt at
the rear brake caliper.
3. Turn the adjusting bolt at the clutch lever in
direction a to increase the cable length or
in direction b to decrease the cable length.
NOTE:
If the cable cannot be adjusted to specification,
consult a Yamaha dealer.
4. Tighten the locknut at the clutch lever.
8-85
Publicité
