Publicité
a
a. Spark plug gap
a. Écartement des électrodes
a. Separación entre electrodos de la bujía
Standard spark plug:
BR8ES (NGK)
Before installing a spark plug, measure the elec-
trode gap with a feeler gauge and adjust to
specification.
Spark plug gap:
0.7–0.8 mm
When installing a spark plug, always clean the
gasket surface and use a new gasket. Wipe off
any grime from the threads and tighten to the
specified torque.
Tightening torque:
Spark plug:
20 Nm (2.0 m0kgf)
8-41
Publicité
