SilverCrest SDI 3500 D5 Mode D'emploi page 15

NOTE
If there is no suitable pan on the induction field 1/3, you will hear a
►
beep after a few seconds which will repeat for approx. 1 minute. The
display t shows the error "
induction field 1/3 to continue cooking (see section Safety cut-off).
5) Press the
temperature is shown on the display t.
6) To switch off the induction field 1/3, press the "On/Off" button
All control lamps switch off. The appliance is now in standby mode.
7) Pull the mains plug out of the mains socket if you no longer wish to use the
appliance.
Timer
You can preselect a cooking time from 1–180 minutes, after which the respective
induction field 1/3 will switch off.
1) Start cooking (in power or temperature mode) as explained above.
2) Press the Timer button
" " appears on the display t. The Timer control lamp
3) Set the desired time by pressing the
The time shown on the display t increases or decreases in steps of 1 minute.
The timer will start if no entries are made within 5 seconds.
NOTE
► Hold down the
The display t now alternates between the set power/temperature level and
the remaining time until switch-off.
When the timer is up, the respective induction field 1/3 switches off
automatically and the appliance switches back into standby mode.
■ 12 │ GB │ IE
". Place a suitable pan with contents on the
r or z button repeatedly until the required power level or
o.
r or z button to scroll through the values more quickly.
p lights up.
r or z buttons.
q.
SDI 3500 D5