Panasonic ER-GB37 Consignes D'utilisation page 15

Cleaning with the brush
1. Brush off any hair trimmings
from the main body and
from around the blade.
2. Brush any hair trimmings
out from between the
stationary blade and the
moving blade while pressing
down the cleaning lever to
raise the moving blade.
3. Apply the oil to the blade.
4. Attach the blade and comb
attachment to the main body.
PB017461 - ER-GB37 _(01GB)_05-07-19.indd 15
Lubrication
• Apply the oil to the blade before and after each use.
1
1
Remove the blade.
2
2
Apply a drop of the oil to
each indicated point.
3
3
Attach the blade to the
main body, turn on the
power and allow to run for
approximately 5 seconds.
► Replacement parts
Replacement part is available at your dealer or Service
Centre.
Blade
Replacement parts for
ER‑GB37
Oil
• Do not use any blade other than the one dedicated as
it may cause defect in performance.
• We recommend Panasonic oil WES003.
Remounting the blade
Fit the mounting hook into
the blade mounting on the
main body and then push
in until you hear a click.
WER9605
WES003
15
2019/5/10 15:40:54