Panasonic ER-GB37 Consignes D'utilisation page 10

Parts identification
A B


C


D


A Main body
1 Trimming height
indicator
2 Dial (Height
adjustment control)
3 Power switch [ / ]
: OFF
: ON
4 Appliance socket
Blade block
B
5 Cleaning lever
6 Moving blade
7 Stationary blade
8 Mounting hook
10
PB017461 - ER-GB37 _(01GB)_05-07-19.indd 10
E



F
@


Comb attachment
C
(1 mm to 10 mm)
AC adaptor (RE9-69)
D
9 Charging plug
 Charge indicator
lamp
 Cord
 Power plug
Accessories
Oil
E
Cleaning brush
F
Charging
• Perform the following steps to charge the trimmer if it
seems to lose the speed.
• Wipe off any water droplets or dirt on the appliance
socket.
• Make sure that the main body is turned off.
1
1
Place the main body on the
AC adaptor.
• Insert it in the AC adaptor
tightly without any gaps.
Not doing so will not charge
the trimmer.
• If you charge the appliance
with power switch turned on,
it will start working when you
remove from the AC adaptor.
2
2
Insert the power plug into a household outlet.
• Check that the charge indicator lamp glows red.
• The charging time differs depending on the rated
voltage. (See page 18.)
3
3
Disconnect the power plug after charging is
completed.
(for safety and to reduce energy usage)
• The charge indicator lamp continues to glow after
charging is complete.
There is no indication to show that "charging is
complete".
2
1
2019/5/10 15:40:48