Deleting Groups - Honeywell 301 Serie Mode D'emploi

•
The address is added to the group and the <end> bracket is shifted one posi-
tion to the right.
•
Do not add duplicate copies of a transmitter.
The process can be repeated until all the desired transmitters in the group (up to
126) have been added. The address for each transmitter added in the Tx Info
menu is available when creating groups.
Note: Groups created in the Groups menu will appear in the product type list (Tx
Info - Ident screen) as "Group xx" (the number assigned to the group when
it was created).

Deleting Groups

Use the empty all groups command to delete all groups previously programmed in
the controller.
Single groups can be deleted with a simple procedure:
•
Scroll to the first transmitter in the group list,
•
Select the transmitter (its address blinks) and scroll to <del>
(<del> erases the entry and <end> marks the end of the stack)
•
Press enter and the group is emptied.
This procedure makes it possible to delete one, several or all entries previously in-
cluded in a group.
Note: Up to 126 groups, with a maximum of 128 members each, can be created.
36