Ident Menu - Honeywell 301 Serie Mode D'emploi

Ident Menu

The Ident, or identification menu allows a component's network ID to be consulted:
1. Tx info 001
-Ident-
NotVul
CO2 (IR)
1. The upper right corner of the screen shows the component's address. If the ad-
dress of the device whose information must be viewed is known:
•
Use the arrows to move the cursor arrow to the on‐screen address
•
Press Enter (the value can be edited while the number is flashing)
•
Use the up or down arrows to increase or decrease the value
•
Press Enter again to validate the entry and display the information for the de-
sired device.
D2 ‐ product name) and the sensor type (ex.: CH4 ‐ methane sensor). These
2. The bottom left corner of the display shows the transmitter name (ex.: S301-
values can also be changed for Group or Vulbus product types. The proce-
dure is identical for both fields: Programming or changing a product or sensor
type
•
Use the arrows to move the cursor to the product type field.
•
Press Enter to select the field (the value can be modified when flashing)
•
Use the arrows to scroll through the list of product types and press Enter when
the desired product or sensor appears
27