Connecting The Subwoofer; Connecting The Soundbar To The Mains - Medion LIFE E64126 Mode D'emploi

10.1. Connecting the subwoofer

The subwoofer automatically connects to the Soundbar as soon as both devices are
switched on.
However, if the subwoofer does not connect with the Soundbar automatically, pro-
ceed as follows:
 Press and hold down the PAIR button on the subwoofer for approximately 3 sec-
onds.
The subwoofer switches to pairing mode and the PAIR LED starts flashing red.
 Switch the Soundbar on, either by pressing its
trol.
The PAIR LED stops flashing as soon as the connection is complete.
However, if the PAIR LED continues flashing, this mean the connection could not
be established. In this situation, unplug the subwoofer for approximately 3 minutes
and then repeat steps 1 and 2.

11. Connecting the Soundbar to the Mains

 Plug the power cable into the AC~ power cable socket.
 Check that all the devices you want to connect are connected.
 Plug the power cable into a 220-240 V ~ 50/60 Hz socket.
118
button, or with the remote con-
UK
OR
EU