Insert Batteries In The Remote Control - Medion LIFE E64126 Mode D'emploi

6. Insert batteries in the remote control

The remote control contains a CR2025 3V lithium battery.
The first time you use the remote control,
pull off the transparent film without open-
ing the battery compartment.
Replace the battery if the device fails to react to com-
mands from the remote control properly. Then follow
these steps:
 Press down the locking tab (b) and pull the battery
holder with the battery (a) out from the remote con-
trol. Dispose of the old battery in accordance with
legal regulations.
 Place a new CR2025-type 3V battery in the holder
(c), with the positive pole pointing upward. Check
the battery polarity is correct.
 Slide the holder with the new battery completely
into the slot (d) in the remote control.
110
b
a
c
d