Nfc-Enabled Smart Device; Connecting A Subwoofer To The Power Supply - Medion LIFE E64126 Mode D'emploi

The Soundbar's device name is displayed as soon as it finds a signal.
If you are prompted to enter a password, enter 0000.
When you hear "PAIRED", and the operating display lights up blue, this means the
two devices are synchronised with each other.
If the connection is interrupted, you hear "DISCONNECTED".

9.1. NFC-enabled smart device

Using the NFC (Near Field Communication) function, you can receive audio signals
wirelessly from an NFC-enabled audio output device over a short distance.
 Switch the Soundbar on, either by pressing its
trol.
 Then press the Source button on the Soundbar or the BT button on the remote
control until the operating display slowly flashes blue.
 Switch on the NFC function and the Bluetooth function on your smart device.
This switches the device to search mode.
 Hold your NFC-enabled smartphone close to the Soundbar, over the marked
area.
 Confirm the query Verbinden mit MD 80122 on your smart device with Ja. Wait
for between 5 and 8 seconds before you move your smart device away from the
loudspeaker.
When you hear "PAIRED", and the operating display lights up blue, this
means the two devices are synchronised with each other.
 Select a medium volume and start playing the sound over your smart device.
 To disconnect the connection, hold your smart device over the marked area
again until you hear "DISCONNECTED".
10. Connecting a Subwoofer to the Power
Supply
 Plug the power cable into the AC~ power cable socket.
 Check that all the devices you want to connect are connected.
 Plug the power cable into a 220-240 V ~ 50/60 Hz socket.
button, or with the remote con-
UK
OR
EU
DE
FR
NL
EN
ES
IT
117