Connecting Audio Equipment - Medion LIFE E64126 Mode D'emploi

 Remove the two screws, one at each end
of the Soundbar.
 Use the screws you have just removed to
attach a wall bracket to each end of the
Soundbar.
 Drill 2 holes into the wall, parallel to each
other (diameter 3 to 8 mm, depending
on the wall construction). These holes
must be 744 mm apart.
 Push the dowels into the drilled holes.
Insert the screws into the dowels, so that
the screw head protrudes approximate-
ly. 5 mm from the wall.
 Use the wall brackets on the Soundbar
to hang it on the screw heads. Gently
push the Soundbar downwards until the
screws engage in the wall brackets on
the Soundbar.

8. Connecting Audio Equipment

 Comply with the notes in section "4. Safety Information".
 Also comply with the information in the operating instructions for the devices to
which you want to connect the Soundbar.
 Switch off all the devices before connecting them to each other.
You can connect a wide range of different audio devices to the Soundbar, for exam-
ple, a MP3 and CD player, your stereo system receiver, your computers or even your
television.
a
b
c
d
e
DE
FR
NL
EN
ES
IT
5 mm
25-30 mm
113