Controller Components - Toro CUSTOM COMMAND Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONTROLLER COMPONENTS

F
IGURE
1
LCD Display: For viewing time, program and status information.
2
+ /On & – /Off Buttons: For entry of program information.
3
Next Button: For selection of information to be programmed or
reviewed.
4
Function Dial: For selecting the programming and operating
functions.
5
Current Time & Date: For setting the current time and date.
6
Station Times: For setting individual watering time for each station.
7
Program Select Switch: For selection of programs A, B, C or D.
8
Program Start Times: For setting the time each program cycle
will start.
9
Watering Days: For setting a watering day schedule for each
program.
10
% Season Adjust: For the increase or decrease of station times for
all stations within a program without changing program memory.
11
Program Erase: For erasing information within a selected program.
12
Sensor Control Switch: To override rain switch sensor input.
13
Manual Program Cycle: For manual operation start of a selected
program watering cycle.
14
Manual Single Station: For timed or untimed operation of a
single station.
15
Off / Rain Delay: For immediate shut down of all controller
output. Programmable output delay for 1–7 days (Rain Delay).
16
Run: For automatic operation.
F
IGURE
17
Safety Fuse: Replaceable 2.0A slow-blow fuse provides
protection from an internal short-circuit condition.
18
Sensor Connection Terminals: For the connection an optional
(normally-closed) rain switch device.
19
Earth Ground Lug: For connection of a 12–16 (2.0–1.0mm
gauge copper ground wire.
20
1/2" NPT Conduit Nipple: For the connection of an electrical
conduit access body for 120 V a.c. power wiring.
21
(Inset) Terminal Strip: For the connection of 220/240 V a.c.
power wiring. (Export models only.)
22
Valve Common Terminals: For the connection of up to three
field (24V) common wires.
23
Valve Wire Terminals: For the connection of valve control wires.
24
Master Valve Terminal: For the connection of a master valve or
pump start relay control wire.
25
Battery Compartment: 9-volt alkaline battery access compartment.
2
Controller Components
1
2
)
2

Publicité

Table des Matières
loading

Table des Matières