Using The Remote Control - Yamaha RX-V620 Mode D'emploi

CONTROLS AND FUNCTIONS
When selecting a preset station
number
1
Set code number "0023" in the AMP/TUN (or
DSP/TUN) position.
See "Setting the Manufacturer Code" for setting the
code.
2
Set the selector dial to the AMP/TUN (or
DSP/TUN) position.
3
You can select a preset station number
directly with the numeric buttons (1 to 8).
See "Tuning in to a Preset Station".
8

Using the Remote Control

D I G I T A L
D I G I T A L
SURROUND
– + – +
30° 30°
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
Approximately 6 m (20 feet)