Accessories And Attachments; Tools Needed For Assembly; Carton Contents - Hitachi B16RM Mode D'emploi

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES
WARNING
Visit your Hardware Department or see the Power
and Hand Tools Catalog to purchase recommended
accessories for this power tool.

TOOLS NEEDED FOR ASSEMBLY

Supplied
Hex wrenches
UNPACKING AND CHECKING CONTENTS
WARNING
If any part is missing or damaged, do not attempt to
assemble the drill press, plug in the power cord, or
turn the switch ON until the missing or damaged part is
obtained and is installed correctly.
Carefully unpack the drill press and all its parts,
and
compare against the list below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened
with kerosene or WD-40.
WARNING
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the drill press.
Not Supplied
Slotted Screwdriver

CARTON CONTENTS

– 9 –
WARNING
Use only accessories designed for this drill press
to avoid injury from broken parts or thrown
workpieces.
You may recommend other accessories not listed in
this manual. See your nearest your store or Power
and Hand Tool Catalog for all other accessories.
Do not use any accessory unless you have
completely read the instruction or operator's manual
for thataccessory.
Adjustable Wrench
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
A Head assembly
B Table
C Base
D Column assembly
Loose parts bag :
E Feed handle
F Lock handle
G Crank Handle
H Hex bolts
I Hex wrenches
Chuck guard assembly (For France,
J
Hungary and Poland only)
K Batteries
L Wedge
M Arbor
Box:
N Chuck key
O Chuck
English
Wrench
QUANTITY
1
1
1
1
3
2
1
4
2
3
1
1
1
1