Cleaning Cycle - Panasonic NC-ZA1 Mode D'emploi

Cleaning Cycle:

Use this cycle occasionally and/or when the display shows
This cleaning programme enables intensive cleaning of inaccessible areas. This programme takes approx. 8 minutes and should
not be interrupted. When display shows
1
Press
2
Select "cleaning programme".
3
Fill the water tank with water, then press
4
Place the cleaning tablet into the powder coffee shaft and close the lids,
then press
, press
on the main menu.
.
.
and follow steps from 3.
Note
• If is pressed, the display will return to the previous display.
.
Note
• If is pressed, the display will return to the main menu.
GB39