Panasonic NC-ZA1 Mode D'emploi page 28

Turn off the power
3
Press
When the rinsing cycle has finished, the
power turns off. Then unplug the espresso
machine.
Espresso machine will turn off automatically in the following conditions.
• When the time set in auto shut off is reached. (P. GB30)
• No action for 15 minutes on step 2 or step 3. « Shut off without rinsing process.
In that case, the machine starts with the cleaning cycle the next time power is turned on.
GB28
to start the rinsing cycle.
(Continued)
Note
• Before starting, following display shows to make actions. (Shows
30 seconds each)
• If is not pressed for 15 minutes, the espresso machine will
turn off without running the rinsing cycle.
• If is pressed, it immediately stops the rinsing process.
After flashes, the display will return to the previous display.
empty the waste
container.
open the drip tray.