Panasonic NC-ZA1 Mode D'emploi page 38

How to Clean
Milk foamer nozzle:
Clean the milk foamer nozzle every day that a milk menu drink is prepared.
1
Press the left side of the door with the dispenser to open.
• When opening and closing the door, the dispenser should be located at the
upper position, otherwise the milk hose on the inside will be jammed.
2
Pull the milk hose out of the milk foamer. Then fold the lever on
the milk foamer upwards and pull the milk foamer out towards
you.
3
Open the cap from the milk foamer. Then remove the milk foamer
nozzle from the milk foamer by inserting the rounded end of the
measuring spoon into the slot of the milk foamer nozzle and
turning 45° to pull it out. The nozzle is lifted up slightly during
turning, so that it can be removed more easily.
4
Clean the milk foamer nozzle with a thin needle.
• Do not use a metal brush or nylon brush.
5
Mix 250 mL of water with 7.5–15 mL of milk system cleaner.
6
Leave all parts of the milk foamer in the cleaner solution for
5 hours or over night and rinse well.
7
Use the brush of the measuring spoon to clean all parts of the
milk foamer nozzle. Make sure that all vents of the milk foamer
and its nozzle are cleaned with brush and rinse well.
8
Put all parts back together by reversing steps 1–3.
GB38
(Continued)
Lever
Cap
Milk foamer nozzle