Siemens SINUMERIK 840Di sl Manuel De Mise En Service page 301

LICENSE=1
SET_OPTIONS=1
SHOW_LICENSE=4
SET_PD=2
[LANGUAGE]
;Softkey "select language" instead of softkey "change language"
; in the main menu of area setup.
;False: Softkey "change language" to toggle between the foreground and
background language.
;True: Softkey "select language" instead of softkey "change language"
;to select one of the installed languages. To use this add the following
values
;to the entries of the LANGUAGE section in the mmc.ini:
;LanguageList= ... , GR
;FontList= ... , Europe
;FontListKO= ... , Europe2
;LBList= ... , allemand
SkSelectLngInsteadSkChangeLng=False
[Softkeys]
; Softkey "Advanced Reset..." 0 = not visible ; 1 = visible
AdvancedReset = 0
; LockResetIfPulsesEnabled = 0 → Reset is possible although pulses are
enabled
; LockResetIfPulsesEnabled = 1 → Reset is not possible if pulses are
enabled
LockResetIfPulsesEnabled = 0
[Reset]
ResetWith_p0972 = true
HMI-Advanced (IM4)
Manuel de mise en service, 03/2009, 6FC5397-0DP10-3DA0
;Set license
;Set options
;Display license
;Logic drives
Liste des fichiers INI
(Activer licence + Reset NCK)
(Modifier les options + Reset
NCK)
(Afficher la gestion des
licences)
(Lecteurs logiques)
A.11 IB.INI
295