Nowsonic SWITCHER Mode D'emploi page 4

www.nowsonic.com
Contents
Introduction
Connectors on the rear panel
Cabling
Controls on the top panel
Specifications
Scope of supply
Disclaimer
Servicing
Legal information
Welcome
Thank you very much for purchasing the Nowsonic Switcher! Nowsonic
Switcher is a controller for connecting an audio source and setting its
level to a connected monitoring system like the Nowsonic RadioCheck
powered speakers. The multifunctional Switcher has a completely pas-
sive signal flow. This means that the sound of the input signal is not co-
lored or even distorted by any active components. The output signal
of Switcher is identical to the input signal, but the signal level can be
attenuated. This allows to set the perfect level for the audio source in
your control or editing room without considering the operating level in
the monitoring signal flow.
Switcher has balanced combo inputs for connecting balanced or unba-
lanced XLR or 1/4" TRS plugs. The two output pairs for connecting
powered monitors or a monitoring amplifier are also implemented as
XLR and 1/4" TRS jacks. A selector switch allows the A/B comparison of
the two connected monitoring systems.
The main volume knob of Switcher serves also as a mute switch for both
output pairs. The enclosure of the compact desktop unit is made of me-
tal and can freely be placed in your work space. Due to the passive signal
flow, no external power supply is required.
5
Switcher
GB
User manual