CONTINENTAL EDISON HG-6209NP27-22P Guide D'utilisation page 34

2. Make sure the device is plugged in and turned
on
CAUTION: During the cleaning process, the iron will
discharge water and scale through the holes in the
soleplate.
CAUTION: RISK OF BURNS!
3. Place the steam generator on the side of
your sink, and hold the iron over the sink.
4. Press the on / off button for 6 seconds until
3 beeps sound.
5. Press the steam trigger to activate descaling.
6. Wait at least 1 minute.
7. At the end of the process, the power
indicator will stop blinking and a beep will
sound 3 times.
8. Wipe the iron with a cloth and replace it on
the control panel.
If you need to stop the cleaning process, press and hold the power button for 6
seconds until the power indicator stops blinking and the buzzer sounds 3 times.
34