CONTINENTAL EDISON HG-6209NP27-22P Guide D'utilisation page 31

Note: When changing from a high temperature setting to a lower temperature
setting, wait until the iron cools down before you continue ironing as you may
damage your clothes. It takes a few minutes for the iron to return to a lower
temperature.
B. STEAM IRONING
1. Follow the instructions in the "Filling the Tank" section.
2. Connect the device and turn it on by pressing the on / off button. The power
indicator lights up.
3. For steam ironing, set the temperature to maximum.
HOT SURFACES
4. Adjust the steam flow with the thermostat knob.
Press the steam button (3) to continuously steam. To stop, press the steam
trigger (4).
If you want to emit steam intermittently, press the steam trigger (4).
WARNING ! RISKS OF BURNS!
Warning ! Never direct the jet of steam at people.
6. If the steam does not come out, it may mean that the tank is empty. To continue
ironing, follow the instructions in the "Filling the Tank" section.
C. VERTICAL IRONING OR VERTICAL DEFROSTING
1. Follow the instructions in the "Filling the Tank" section.
2. Connect the device and turn it on by pressing the on / off button. The power
indicator lights up.
3. Adjust the steam flow with the thermostat knob.
4. Hang the garment on a hanger and lightly stretch the fabric with one hand.
5. Hold the iron upright at a minimum distance of 20-30 cm from the fabric.
In a up and down motion, press the steam button (3) to continuously steam.
To stop, press the steam trigger (4).
If you want to emit steam intermittently, press the steam trigger (4).
31