Table des Matières
Publicité
Maintenance
Remove the plug from the socket before carrying out any adjustment, servicing or maintenan-
ce. Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.
If the supply cord is damaged, it must be replaced by the manufacturer, his after sales service
or similarly qualified persons in order to avoid any hazard or injury.
Troubleshooting
1. If your sander will not operate, check the power at the mains plug.
2. If the sander does not abrade surface, checking the sanding paper. If the sanding paper has
been worn, replace the new paper and try again. The paper must be kept in a dry place, if it is
allowed to become damp, the abrasive particles will lose their adhesion to the backing paper
and will not abrade.
3. If the sander dose not move smoothly, The sanding paper may be loose, damaged or wrin-
kled. Replace and try again.
4. If a fault can not be rectified return the sander to an authorized dealer for repair.
150703-Manual-A.indd 6
EN
1/03/13 15:49:50
Publicité
Table des Matières
