SOLAC SH7087 Mode D'emploi page 10

SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- CAUTION: There is a risk of fire if the appli-
ance's cleaning is not done according to these
instructions.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Concentrator
B Filter
C Speed and cold selector
D Body
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the ap-
pliance is used a light smoke may be detected.
After a short time, this smoke will disappear.
USE:
- Unroll the cable completely before plugging it
in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Guide the diffuser of the appliance to direct the
flow of air in the desired direction.
- Turn the appliance by using speed selector
- Select the desired speed.
HOW TO DRY THE HAIR:
- Move the appliance around in circles to distrib-
ute the air along the hair.
IONIC FUNCTION:
- The appliance can generate negative ions.
- Once the appliance is in operation, it automati-
cally activates the generation of negative ions.
- Negative ions are useful for removing the static
electricity, smells and fumes.
COOL AIR BLOW:
- This feature provides a flow of cool air to help
to shape the hair.
- Press the cool air blow button (C) to use this
function.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, moving the speed selec-
tor in the "0" position
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
AIR CONCENTRATOR ACCESSORY
- This accessory is used to concentrate the air
flow into one specific area.
- Attach the unit to the product by pressing until
you hear a click (Fig.1).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.