Transport And Storage; Receipt And Control Of Deliveries; Unpacking And Control Of Goods; Commissioning - hawa 2676-0201-00-00 Manuel D'utilisation

4 Transport and storage

Please provide the following environmental conditions during transport and storage:
• dry
• frost-free
• dust-protected
• corrosion-protected

4.1 Receipt and control of deliveries

The goods are delivered on an Euro pallet.
Please check the packaging after receipt of goods for:
• transport damages
• other conspicuous features
Any damage found must be documented immediately (damages should be confirmed in writing by the carrier!)

5 Unpacking and control of goods

Dispose the packaging material environmentally friendly or re-use it!
• Check the goods for damages
Any damage found has to be documented and reported to your local sales office (see last page)
• Check the goods upon receipt for completeness
Fig. 1
Fig. 1
• Cable duct cutter with hydraulic cylinder and quick release coupling
• Insertion guide with clamping device
• Length stop 1 m
• Hook
• Wedges - left + right
• Operating instructions
• Declaration of conformity / Declaration of incorporation
→

6 Commissioning

Follow all operating instructions in order to minimize the risk of bodily injuries und tool damages.

6.1 Assembly

Bolt the cable duct cutter (1) on a solid and stable base with 4 screws. Depending on the material of the base use M12 or M10 allen screws or 6 mm
wood screws with washers.
Please pay attention to the following:
Correct height for fatique-free working.
Mounting of the length stop for cutting:
.
Fix the stop (5) with 2 screws
Abb. 1
3 4 1
7
2 8 5
6 7
(it. 1 + 2)
(it. 3+4)
(it. 5)
(it. 6)
(it. 7) →
2676-0000-01-77
9